Sluggish sink drains are a common household problem. It may seem as if the water will take forever to drain out. In addition to it, the filthy water leaves a greasy residue on the sink. These are mainly caused due to piling up of debris such as hair, grease etc. this is when you need to get some drain unblockers Auckland ideas that can help you in making your drain work fast.
There are several ways to make a slow drain work again. This is probably one of the easiest and quickest processes to unblock and make your drain work smoothly. Firstly, keep the water for boiling. Now, pour it down the drain with a break of several seconds between each pour. This usually works for the initial stage of blockage. Even after trying this method, if the liquid doesn’t drain out then, it is time to contact the drain unblockers Auckland.
You will require vinegar and baking soda for this method. Pour ½ cup of baking soda followed by ½ cup of vinegar. Beware and be careful. The acidic reaction occurs like a volcanic reaction often seen at school. Then, after 10 to 20 minutes, pour some hot boiling water. You can repeat the process to clean the drain completely.
You can also use salt and baking powder. Pour down 1 cup of salt and ½ cup of baking soda keep it for few hours or overnight, followed by pouring a tea kettle of boiling water. This should be done more frequently to keep the drain clean and prevent it from some chronic damage.
Using a Plunger
When no liquid is flowing down the sink due to some kind of huge obstruction then it is time to use a plunger or any drain cleaning machine bought from a store. Make sure to cover the drain opening completely with the plunger cup. Make sure all other outlets are plugged with wet rags. This will not let the plunged pressure to divert through the overflow hole. Hold the plunger upright and plunge for about 6-7 times vigorously. Check whether the sink is draining between regular interval. Once the water starts draining out quickly, pour down some boiling water. This drain unblockers Auckland method will help eliminate any remaining debris in the drain.
Using plumber’s snake
This method is for those adamant clogs which do not open up even after using a plunger. To go on with this method you will require a plumber’s snake or simply a drain snake. In case you don’t have it, you can make it with the help of a wire hanger. Firstly, straighten the wire and then, bend it at one end to make a hook like structure. Push the wire down the drain as far as you can get it. Then try to get hold of all those filthy stuff and take them out. Do not push the debris downwards. It may get struck, thus adding to your dismay. Lastly, remove the wire and run boiling hot water to drain away the leftover debris.
As someone has rightly said prevention is better than cure. Here too, prevention is the cornerstone to keep away the drain from clogging. Even a small initiative will be of great help. Cover drains with strainers to keep out hairs and other substances from entering into the drain. If you are too late, then you might want to go for any of the drain unblockers Auckland.